2020 Yamaha DRIVE2 CONCIERGE 4 GAS EFI
DRIVE2 CONCIERGE 4
Whether picking up VIPs at a private airport, or escorting guests on a factory tour, our four- and six-seat Concierge models will impress even the most discerning passengers. With a smooth, quiet ride, and the widest, most comfortable seats in the industry, these vehicles provide a truly first-class experience.
Engine
- Engine Type:Yamaha-built, 357 cc, low-emission single cylinder 60° incline OHV
- Air Cleaner:Two-stage, urethane-foam pre-cleaner, and high-capacity pleated paper cartridge
- Fuel system:Electronic Fuel Injection
- Lubrication system:Splash-style positive oil lubrication
Dimensions
- Wheelbase:2492 mm (98.1 in)
- Oil Capacity:1 U.S. quart (1 liter, 1000 cc) liter
- Dry Weight:349 kg (767 lbs) w/o suntop and batteries 519 kg (1144 (lbs) w/ Trojan T-875 batteries
- Cooling System:Forced Cooling
- Warranty:Standard 2-year limited vehicle warranty.
- Tire Size:205/65-10 DOT (4-ply rating)
- Overall Length:3250 mm (128 in)
- Overall Width:1200 mm (47.2 in)
- Brakes:Self-adjusting, mechanical rear drum.
- Seating:Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and matted to a warp and moisture-resistant polypropylene bottom strengthened with plated steel inserts.
- Body:Custom-formulated thermoplastic olefi n and the front is painted with a two-part top coat of high-luster automotive-grade polyurethane.
- Seating Capacity:4 persons
- Starting System:Starter generator with pedal start system
- Overall Height (with suntop):1910 mm (75.2 in)
- Front Wheel Suspension:Tru-Trak II™ fully independent automotive-style strut suspension.
- Rear Wheel Suspension:Unit swing arm with coil springs over hydraulic shock absorbers.
- Bumpers:Front and rear 5 mph energy-absorbing bumpers.
- Maximum Forward Speed:19 mph (31 km/h)
- Overall Height (without suntop):1222 mm (48.1 in)
- Maximum Reverse Speed:19 mph (31 km/h)
- Front Wheel Tread:870 mm (34.3 in)
- Rear Wheel Tread:980 mm (38.6 in)
- Minimum Ground Clearance:148 mm (5.8 in)
- Floor Board Height:342 mm (13.5 in)
- Minimum Turning Radius:14.4 ft (4.4 m)
Other
- Frame:HybriCore™ Chassis features a robotically welded automotive ladder-style frame mated to a polypropylene structural floor. Frame components are protected with a multi-step phosphate treatment, electro-deposition epoxy-based coating, and an electro statically applied polyester/urethane powder topcoat.